Bipam News - shotblastmachine https://www.bipam.net/rss/author/shotblastmachine Bipam News - shotblastmachine en Copyright 2025 Bipam.net - All Rights Reserved. What Is Mesh Belt Shot Blasting Machine https://www.bipam.net/what-is-mesh-belt-shot-blasting-machine https://www.bipam.net/what-is-mesh-belt-shot-blasting-machine Sat, 12 Jul 2025 11:57:06 +0600 shotblastmachine What Is Mesh Belt Shot Blasting Machine
Mesh belt shot blasting machine is a kind of functional shot blasting equipment for cleaning dishes, flakes, castings, machine bodies, and structural parts. It can apply strong shot blasting to the surface of the original steel and castings to remove the rust layer, welding slag and oxide scale on it, so that it can obtain a uniform metal luster, so as to improve the coating quality and anti-corrosion effect of the steel. Mesh belt shot blasting machines are mainly used in automobile, aerospace, railway and machinery manufacturing industries. The designed and constructed continuous metal mesh belt shot blasting machine allows the parts to rotate through in an automatic and continuous manner, accepts shot blasting cleaning in multiple directions, and the hub type blasting head maximizes shot blasting efficiency and avoids collisions between parts And damage the surface of the part.

]]> Mar Adjustment And Replacement Steps of Shot Blasting Machine Control Cage https://www.bipam.net/mar-adjustment-and-replacement-steps-of-shot-blasting-machine-control-cage https://www.bipam.net/mar-adjustment-and-replacement-steps-of-shot-blasting-machine-control-cage Sat, 12 Jul 2025 09:58:03 +0600 shotblastmachine Thecontrolcagecan make the projectiles that start to be accelerated inImpelieronly fly out from the window of thecontrolcage and are fixed on the shot blasting machine shell.
Adjustment ofshot blasting machine control cage:
During use, due to the wear of thecontrolcage, the diffusion angle of the projectile increases, resulting in accelerated wear of theshot blasting machinesand other guards in the cleaning room. Therefore, when the wear of thecontrolcage exceeds 10mm, a newcontrolcage should be replaced (the angle between the opening direction and the horizontal square line is 45 degrees). The shot blasting machine has three types of projection speeds. When the projection speed needs to be changed, it can be accomplished by changing the motor pulley of the shot blasting machine.
The replacement process is as follows:
First, turn off the shot blasting machine and the main power supply. After the shot blasting machine is completely stopped, loosen the motor fastening bolts, remove the V-belt, and then use a hexagonal wrench to loosen the pulley fastening bolts. Use three M12 bolts to tighten the cone. The shaft sleeve is separated from the pulley, and the pulley is removed. Match the required pulley with the tapered bushing. Press into the motor shaft, then use a hex wrench to tighten the three M10 pulley fastening bolts. Then put on the V-belt. Finally, push the motor to a suitable position with the top screw, and tighten the bolts to fasten the motor.
Note: The outer end face of the motor pulley should be on the same plane as the outer end face of the shot blastingmachinewheel pulley. Otherwise, loosen the three M10 pulley fastening bolts for adjustment. The three projectile speeds correspond to the two types of lifters, respectively, and the devices and adjustment methods of the lifter motor sprocket are the same as above.
]]>